ULTRAMAX Parts List
|
 |
Item # |
Part # |
ITEM NAME ( Description ) - Cleaner Model(s) it belongs to | Units | Price |
Buy Now |
1 |
A10200 |
HANDLE ASSY. (Blue & White, Bracket included) - Ultramax | EACH | $130.00 |
|
2 |
S1100B |
HANDLE BRACKET (Blue) - All Aquabot except T2 and T4, All Aquamax, All Ultramax cleaners listed | EACH | $29.99 |
|
4 |
11003 |
CLEVIS PIN (Round Head, hole in end) - Use to link the Handle Assembly arm to the Handle Bracket | EACH | $2.70 |
|
6 |
11004 |
WASHER (St.Steel) - Use around the Clevis Pin underneath the Cotter Ring on Handle Assembly Bracket | EACH | $2.50 |
|
7 |
11005 |
COTTER RING (Aluminum, 3/16") - Use at end of the Clevis Pin to hold the Handle Bracket | EACH | $0.70 |
|
8 |
1105 |
SCREW (10-32, 7/8", Phil Pan Head) - Use to fasten the Handle Bracket to the Body Assembly | EACH | $1.20 |
|
9 |
2701 |
SCREW (#8, 11/16", Phil Pan Head) - Use to fasten the Handle on Ultramax to Shell | EACH | $1.20 |
|
NA |
2500 |
SCREW (#8, 1-1/4" Pan Head) - Use on Drive Motor Spacer Bracket if necessary | EACH | $1.20 |
|
11 |
11006 |
HOOK (St.Steel, Snap-Hook, Eyelet for Pin) - Used to fasten Rope Assembly to Handle on large cleaners | EACH | $2.75 |
|
12 |
2111 |
P-CLIP (5/8", Coated Steel) - Use to fasten the insulated part of a 4,7,9-wire cable to the Handle Assy. | EACH | $2.35 |
|
12 |
2112 |
P-CLIP (11/16", St.Steel) - Use to fasten the foam-insulated part of a 9-wire cable to the Handle Assy. | EACH | $2.35 |
|
12 |
2103 |
P-CLIP (11/16", Plastic) - Use to fasten the foam-insulated part of a 9-wire cable to the Handle Assy. | EACH | $1.20 |
|
13 |
2700 |
SCREWS (#8, 11/16", Phil Pan-Flat Head) - Use to fasten P-Clips, Sideplates, and Drive Motors | EACH | $1.20 |
|
14 |
2260 |
SCREWS (#6, 7/16", Phil Pan-Flat Head) - Use to fasten P-Clips, and Sideplates on Jet and Rover cleaner | EACH | $1.20 |
|
15 |
1638 |
PLUG (9-Pin, Female, 9-Wire, Only for end of the Cable that plugs into Power Supply) - Ultramax / Junior | EACH | $44.00 |
|
16 |
S7935 |
EZ-SWIVEL (For 4,5,7,or 9-wire Cable) - Can be used on any Cable Assembly with 4 or more wires | ASSEMBLY | $43.98 |
|
17 |
A16125 |
CABLE ASSY. (9-Wire, 120 Foot, Floating) - Ultramax Junior, Ultramax | EACH | $725.00 |
|
17 |
A16159 |
CABLE ASSY. (9-Wire, 150 Foot, Floating) - Ultramax Junior, Ultramax ** optional extra length | EACH | $799.00 |
|
NA |
1602 |
FLOAT BALL (Large) - For Cable Assy. ** position it the same distance from unit as maximum depth of po | EACH | $3.50 |
|
20 |
A8326 |
ROPE ASSEMBLY (Blue & White, Nylon) - Ultramax, Power Handi-Vac 300 | EACH | $55.00 |
|
21 |
8329 |
CONNECTOR (Sky Blue) - Use on Rope Assembly to form a 'Y' shape to attach to sides of the Handle Ass | EACH | $3.25 |
|
21 |
8331 |
CONNECTOR (Stainless Steel) - For making small loops in the Nylon Rope Assembly | EACH | $5.50 |
|
25 |
2240B |
OUTLET TOP (Top, Bottom, & Cap) - Ultramax Junior, Ultramax | EACH | $28.00 |
|
26 |
A22200NOHOLE |
BODY ASSY. (1/2 of machine, White, with Holes, Lock Tabs, Outlet Ring, Inserts) - Ultramax (half of body) | EACH | $135.00 |
|
26 |
A22200 |
BODY ASSY. (COMPLETE, White, Lock Tabs, Outlet Ring, Inserts, Inner Sideplates) - Ultramax (entire body | EACH | $285.00 |
|
NA |
8351 |
FLAT PLUG (White, Plastic) - Use to plug large holes on the Body Assembly | EACH | $1.20 |
|
27 |
2251 |
SCREW (8-18 x 3/4, Phil Small Head) - Use for Pump to Body in some cleaners, and Jet Valve Assembly | EACH | $1.20 |
|
28 |
2224 |
OUTER BODY (Large, Beige) - Ultramax | EACH | $89.00 |
|
NA |
2400 |
NAIL PLUG (White, Plastic) - Use to plug small holes on the Body Assembly | EACH | $1.20 |
|
30 |
SP3402 |
LOCK-NUTS (Hex, Nylon insert, for various uses: Sideplate Bolts, Anti-Roll Brackets, Pole Handle Assy.) | SET OF 8 | $6.00 |
|
36 |
SP9204BL |
LOCK-TABS (Blue, Plastic) - For All Body Assemblies, used to hold Bottom Lids to base of cleaners | SET OF 2 | $3.50 |
|
38 |
2303 |
SCREWS (18-8, 8/32" x 1/2", Phil Bev Head) - Use to fasten the Lock-Tabs to the Body Assembly | EACH | $1.20 |
|
39 |
7133 |
LOCK-NUT (Nylon Insert, Hex) - Use to fasten the Screws of the Lock-Tabs | EACH | $0.80 |
|
43 |
8323 |
SCREW (3-1/4", Phil Pan Head, Long) - Use to fasten Body Assemblies together on top of the Ultramax | EACH | $2.35 |
|
44 |
2019 |
SPACER (2-1/8", PVC, White) - Use to space apart Body Assemblies between the Ultramax | EACH | $1.20 |
|
45 |
S3400B-6H |
SIDEPLATE (Blue, 4 holes for Bolts, 2 holes to Motor) - Aquabot Plus RC / Ultra, Aquamax / Biturbo, Ultram | EACH | $29.99 |
|
46 |
S3400W |
SIDEPLATE (Short Legs, Use between Body Assemblies on the Ultramax) | EACH | $29.99 |
|
49 |
SP3401 |
SCREW (Bolts, Long, For Sideplate) - Aquabot Plus RC, Aquabot Ultra, All Aquamax & Ultramax units | SET OF 8 | $8.99 |
|
50 |
8307 |
SCREW (Bolts, Extra-Long, Use to fasten Bodies together through the Middle Sideplate on the Ultramax) | EACH | $1.20 |
|
51 |
2600 |
BUSHING (White, Plastic) - All Aquabot cleaners, All listed Aquamax and Ultramax cleaners | EACH | $2.65 |
|
54 |
3500 |
SMALL ROLLER (White, Plastic) - Supports the Drive Track, install on lower legs of Sideplate | EACH | $2.65 |
|
56 |
3506 |
STEPPED SLEEVE ROLLER (White, Thicker end supports Drive Belts, Install on upper Sideplate legs) | EACH | $2.65 |
|
57 |
SP3302 |
DRIVE BELTS (Tan) | PAIR | $16.50 |
|
58 |
A3605 |
PULLEY ASSEMBLY (Medium, ~ 2.75 inches) - Use for cleaners with Black Drive Motors | EACH | $32.00 |
|
NA |
3607 |
WASHER (Use on All Pulley Assemblies, Use on Movable Axle of Jet / Rover cleaners, Rounded edges fac | EACH | $5.50 |
|
NA |
SP3502 |
TENSION DEVICE (OLD, replaced by Stepped Sleeve Rollers) - Formerly used to add Tension to Drive Bel | EACH | $35.00 |
|
60 |
A6010U |
PUMP MOTOR (Aquabot Plus RC, AB Ultra, Aquamax Jr Plus, Aquamax, AMAX Biturbo, Ultramax Jr, UMAX) | EACH | $279.99 |
|
61 |
4400 |
PROPELLER - All cleaners | EACH | $11.56 |
|
NA |
7109 |
WASHER (St.Steel) - Use with # 2500 screw against Body Assembly to fasten Drive Motor Spacer Bracket | EACH | $0.60 |
|
79 |
A2241S |
JUNCTION BOX ASSY. (Connections: 9-Pin, 2 Pump Motor, 2 Drive Motor) - Ultramax, Ultramax Beach Boy | EACH | $199.99 |
|
79 |
A2245S |
JUNCTION BOX ASSY. (Connections: 9-Pin, 2 Pump Motor, 2 IR, 2 Drive Motor) - Ultramax IR, UMAX BB IR | EACH | $225.00 |
|
80 |
A8523SL |
DRIVE MOTOR (MASTER, Black) - Ultramax Junior, Ultramax | EACH | $579.99 |
|
80 |
A8524BBSL |
DRIVE MOTOR (MASTER, Black, BB Air Sensor) - Ultramax Jr Beach Boy, Ultramax Beach Boy | EACH | $579.00 |
|
80 |
A8532V |
DRIVE MOTOR (SLAVE, Green) - Use for all units which use two Drive Motors | EACH | $515.00 |
|
NA |
8299 |
***SPACER BRACKET (w/ hardware) - Use when older Black Drive Motor Legs are too short for Pulley | ASSEMBLY | $23.00 |
|
83 |
4613 |
SPIRAL PIN (3/4", solid Stainless Steel) - Used in the end of the Drive Motor shaft, use Lock-Tite | EACH | $1.20 |
|
86 |
SP5474 |
SHRINKABLE BUTT CONNECTORS (Light Blue, crimp closed and heat shrink to seal) | PAIR | $1.20 |
|
NA |
A38200 |
WHEEL TUBE ASSY (OLD, Ultramax) | EACH | $65.50 |
|
90 |
A38200MG |
WHEEL TUBE ASSY (NEW, Ultramax) - Model 'G' | EACH | $65.00 |
|
91 |
11058 |
RETAINING RING (E-Clip, New Style) - Aquabot Turbo, AB Plus RC, Aquabot T4, AB Ultra, All AMAX / UMAX | EACH | $3.50 |
|
91 |
11059 |
RETAINING RING (C-Clip, requires Snap-Ring Pliers) - Aquabot T2, also for inner Sideplates of Ultramax | EACH | $3.50 |
|
92 |
3603 |
WASHER (Nylon, Flat) - Use for All cleaners on the end of Wheel or Wheetube Assembly | EACH | $1.20 |
|
97 |
SP3009 |
PVA CLIMBING BRUSHES (Light Blue PVA Foam, Short) - Aquabot / Turbo, Aquamax Jr units, Ultramax *** | PAIR | $64.00 |
|
NA |
SP3007 |
PVA CLIMBING RINGS (Light Blue PVA, 1" thick) - Fit over Rubber Brushes to add more traction ** | SET OF 4 | $25.00 |
|
99 |
3200 |
DRIVE TRACK (Black) | EACH | $21.00 |
|
99 |
3201 |
DRIVE TRACK (Blue) | EACH | $21.00 |
|
99 |
3203 |
DRIVE TRACK with TRACTION TABS (Blue) - For all Model 'G' units | EACH | $21.00 |
|
100 |
SP2675 |
MODEL G SPACER BRACKETS ** necessary with 'Model G' Drive Tracks | SET OF 4 | $4.50 |
|
101 |
8100 |
FILTER BAG (Fine) - Aquabot / Turbo / T2 / T4 / Plus RC, Aquamax Jr, PHV 100/300, small Jet / Rover, UMA | EACH | $47.00 |
|
101 |
8200 |
FILTER BAG (Mesh) - Aquabot / Turbo / Plus RC, Aquamax Jr, PHV 100/300, small Jet & Rover, UMAX ** | EACH | $46.00 |
|
103 |
5300 |
FILTER SCREEN (White, Cage) - Aquabot / Turbo / Plus RC, AMAX Jr, PHV 100/300, small Jet / Rover, UM | EACH | $26.50 |
|
104 |
2702 |
SCREW (#6, 11/16", Phil Pan-Flat Head, Pointed) - For fastening the 5300 / 5301 Filter Screen to the Body | EACH | $1.20 |
|
105 |
A9200X |
BOTTOM LID ASSY. (White, W-shaped Wire Frame) - Aquabot, small Jet / Rover, Aquamax Jr, Ultramax *** | EACH | $89.00 |
|
106 |
9305BL |
INTAKE VALVE FLAP (Blue Plastic) - Fits into Intake of All small # 9200 Bottom Lids | EACH | $4.34 |
|
110 |
A7066 |
POWER SUPPLY (9-Pin, Male Socket, Radio RC) - All Ultramax cleaners | EACH | $455.00 |
|
111 |
SP7140 |
SOCKET ASSY. (9-Pin, Male, 9-Wire) - Ultramax Jr, Ultramax | EACH | $32.00 |
|
NA |
7143 |
DUST CAP (Rubber, Looped, Removable) - Ultramax Jr, Ultramax | EACH | $1.20 |
|
NA |
7165E |
DUST CAP (Plastic, Threaded, Chained) - Ultramax Jr, Ultramax | EACH | $1.20 |
|
112 |
7005 |
FUSE HOLDER (Standard, Push & Turn style) - Most Residential and Commercial cleaners | EACH | $7.98 |
|
NA |
7002 |
FUSE (5.0 Amp, 250 Volt, Slow-Blow) - Aquabot Plus RC, Aquabot Ultra, All AMAX, All UMAX, All PHV | EACH | $3.00 |
|
114 |
7106 |
ON / OFF LIGHTED SWITCH (Wide, Standard, Red, 3-Wire) - Use for Power Supply | EACH | $7.70 |
|
115 |
7023 |
ANTENNA (4", with Hardware) - Aquabot T4, Aquabot Plus RC, Aquabot Ultra, UMAX Junior, Ultramax | EACH | $11.50 |
|
116 |
220114C |
TRANSMITTER (Radio RC, Grey & Yellow / Blue▲▲▲ / Red LED light) - Ultramax FOR NEW Units only - Transmits to A220203FCC Receiver - Older units will need KIT | EACH | $89.00 |
|
117 |
SP7041 |
HANDLE (Rubber, with Holders and Hardware) - Ultramax Junior, Ultramax | ASSEMBLY | $5.88 |
|
118 |
7102 |
CORD FOR POWER SUPPLY (3-Wire, Green, Black, and White) - Use on All Power Supplies | EACH | $11.00 |
|
NA |
2007C |
INFRA RED SENSOR (Ultramax Junior, Ultramax) | EACH | $161.50 |
|
NA |
2009 |
IR BRACE ASSEMBLY (all hardware included) - Use to hold the IR Sensor in position on the cleaner | ASSEMBLY | $22.99 |
|
NA |
2008 |
SCREWS (Use to hold IR Brace inside of Outer Shell) - Screw from outside of Shell into IR Brace Assembl | EACH | $1.20 |