AQUAMAX Parts List
|
 |
Item # |
Part # |
ITEM NAME ( Description ) - Cleaner Model(s) it belongs to | Units | Price |
Add To Cart |
1 |
A10201 |
HANDLE ASSY. (Blue & White, Bracket included) - Aquabot Ultra, Aquamax | EACH | $109.99 |
|
1 |
A10203 |
HANDLE ASSY. (Blue & White, Bracket included) - Aquamax Biturbo, Ultramax Junior | EACH | $119.99 |
|
2 |
S1100B |
HANDLE BRACKET (Blue) - All Aquabot except T2 and T4, All Aquamax, All Ultramax cleaners listed | EACH | $29.99 |
|
4 |
11003 |
CLEVIS PIN (Round Head, hole in end) - Use to link the Handle Assembly arm to the Handle Bracket | EACH | $2.70 |
|
6 |
11004 |
WASHER (St.Steel) - Use around the Clevis Pin underneath the Cotter Ring on Handle Assembly Bracket | EACH | $2.50 |
|
7 |
11005 |
COTTER RING (Aluminum, 3/16") - Use at end of the Clevis Pin to hold the Handle Bracket | EACH | $0.70 |
|
8 |
1105 |
SCREW (10-32, 7/8", Phil Pan Head) - Use to fasten the Handle Bracket to the Body Assembly | EACH | $1.20 |
|
10 |
2500 |
SCREW (#8, 1-1/4" Pan Head) - Use on Back Plate Block, and for White Drive Motors through Handle Assy. | EACH | $1.20 |
|
12 |
2100 |
P-CLIP (1/4", Plastic) - Use to fasten the non-foam-insulated part of a 2-wire cable to the Body | EACH | $1.20 |
|
12 |
2101 |
P-CLIP (5/16", Plastic) - Use to fasten the non-foam-insulated part of a 4-wire cable to the Body | EACH | $1.20 |
|
12 |
2104 |
P-CLIP (3/8", Plastic) - Use to fasten the foam-insulated part of a 2-wire cable to the Body | EACH | $1.20 |
|
12 |
2102 |
P-CLIP (7/16", Plastic) - Use to fasten the foam-insulated part of a 2-wire cable to the Handle Assy. | EACH | $1.20 |
|
12 |
8316 |
P-CLIP (9/16", Plastic) - Use to fasten the Heat Shrink part of the 2-wire cable to the Handle Assy. | EACH | $1.20 |
|
12 |
2110 |
P-CLIP (5/8", St.Steel) - Use to fasten the foam-insulated part of a 4-wire cable to the Handle Assy. | EACH | $2.30 |
|
12 |
2111 |
P-CLIP (5/8", Coated Steel) - Use to fasten the insulated part of a 4,7,9-wire cable to the Handle Assy. | EACH | $2.30 |
|
13 |
2700 |
SCREWS (#8, 11/16", Phil Pan-Flat Head) - Use to fasten P-Clips, Sideplates, and Drive Motors | EACH | $1.20 |
|
14 |
2260 |
SCREWS (#6, 7/16", Phil Pan-Flat Head) - Use to fasten P-Clips, and Sideplates on Jet and Rover cleaner | EACH | $1.20 |
|
15 |
1601 |
PLUG (3-Pin, Female, 2-Wire) - Aquabot / Storm / Turbo / Tempo / T2, Aquamax, Aquamax Jr, All Jet / Rover | EACH | $14.00 |
|
15 |
1635 |
PLUG (4-Pin, Female, 4-Wire) - Aquabot Turbo Solo / Turbo RC, Aquamax Jr RC, Aquamax Biturbo | EACH | $44.00 |
|
15 |
1636 |
PLUG (7-Pin, Female, 7-Wire) - Aquabot T4, Aquamax Biturbo RC | EACH | $44.00 |
|
16 |
S7930 |
EZ-SWIVEL (For 2-wire Cable) - Can be used on any 2-wire Cable Assembly | ASSEMBLY | $43.98 |
|
16 |
S7935 |
EZ-SWIVEL (For 4,5,7,or 9-wire Cable) - Can be used on any Cable Assembly with 4 or more wires | ASSEMBLY | $43.98 |
|
17 |
A17121 |
CABLE ASSY. (2-Wire, 120 Foot, Floating) - Aquamax | EACH | $575.00 |
|
17 |
A16122 |
CABLE ASSY. (4-Wire, 120 Foot, Floating) - Aquamax Biturbo, Power Handi-Vac 200/300 | EACH | $725.00 |
|
17 |
A16119 |
CABLE ASSY. (7-Wire, 120 Foot, Floating) - Aquamax Junior Plus RC, Aquamax Biturbo RC | EACH | $725.00 |
|
25 |
2230B |
OUTLET TOP (Top and Bottom) - Aquabot / Storm / Turbo / Tempo / Plus RC / Ultra, Aquamax / Jr / Biturbo | EACH | $28.00 |
|
26 |
A22201 |
BODY ASSY. (White, with Lock Tabs, Outlet Ring, Inserts) - Aquamax | EACH | $210.00 |
|
26 |
A22201AMXSOLO |
BODY ASSY. (White, with Lock Tabs, Outlet Ring, Inserts) - Aquamax Solo, Aquamax Remote Control | EACH | $210.00 |
|
26 |
A22201MBT |
BODY ASSY. (White, with Lock Tabs, Outlet Rings, Inserts) - Aquamax Biturbo | EACH | $210.00 |
|
26 |
A22201MBTSOLO |
BODY ASSY. (White, with Lock Tabs, Outlet Rings, Inserts) - Aquamax Biturbo Solo, Aquamax Biturbo RC | EACH | $210.00 |
|
NA |
8351 |
FLAT PLUG (White, Plastic) - Use to plug large holes on the Body Assembly | EACH | $1.20 |
|
27 |
2251 |
SCREW (8-18 x 3/4, Phil Small Head) - Use for Pump to Body in some cleaners, and Jet Valve Assembly | EACH | $1.20 |
|
29 |
SP2300 |
ANTI-ROLL BRACKETS (Plastic, White) - Aquabot / Turbo / Plus RC / Ultra, Aquamax / Jr / Biturbo | SET OF 4 | $11.00 |
|
NA |
2400 |
NAIL PLUG (White, Plastic) - Use to plug small holes on the Body Assembly | EACH | $1.20 |
|
30 |
SP3402 |
LOCK-NUTS (Hex, Nylon insert, for various uses: Sideplate Bolts, Anti-Roll Brackets, Pole Handle Assy.) | SET OF 8 | $6.00 |
|
31 |
2261 |
SCREW (M-5, Phil Bev Head) - Use to fasten the Anti-Roll Brackets to the Body Assembly | EACH | $1.20 |
|
36 |
SP9204BL |
LOCK-TABS (Blue, Plastic) - For All Body Assemblies, used to hold Bottom Lids to base of cleaners | SET OF 2 | $3.50 |
|
38 |
2303 |
SCREWS (18-8, 8/32" x 1/2", Phil Bev Head) - Use to fasten the Lock-Tabs to the Body Assembly | EACH | $1.20 |
|
39 |
7133 |
LOCK-NUT (Nylon Insert, Hex) - Use to fasten the Screws of the Lock-Tabs | EACH | $0.80 |
|
45 |
S3400B-8H |
SIDEPLATE (Blue, 4 holes for Bolts, 4 holes for Piston Clamps) - All Aquamax Solo / RC cleaners | EACH | $29.99 |
|
45 |
S3400B-6H |
SIDEPLATE (Blue, 4 holes for Bolts, 2 holes to Motor) - Aquabot Plus RC / Ultra, Aquamax / Biturbo, Ultram | EACH | $29.99 |
|
49 |
SP3401 |
SCREW (Bolts, Long, For Sideplate) - Aquabot Plus RC, Aquabot Ultra, All Aquamax & Ultramax units | SET OF 8 | $8.99 |
|
51 |
2600 |
BUSHING (White, Plastic) - All Aquabot cleaners, All listed Aquamax and Ultramax cleaners | EACH | $2.65 |
|
52 |
2610 |
BUSHING (White, Plastic, Use for Pin on Body Assembly) - Aquabot / Storm / Turbo / Tempo, All Aquamax | EACH | $4.50 |
|
54 |
3500 |
SMALL ROLLER (White, Plastic) - Supports the Drive Track, install on lower legs of Sideplate | EACH | $2.65 |
|
55 |
3700 |
LARGE ROLLER (White, Plastic) - Supports the Drive Track, installs on Body Assembly Pin Support | EACH | $3.50 |
|
56 |
3506 |
STEPPED SLEEVE ROLLER (White, Thicker end supports Drive Belts, Install on upper Sideplate legs) | EACH | $2.65 |
|
57 |
SP3302 |
DRIVE BELTS (Tan) | PAIR | $16.50 |
|
58 |
A3600 |
PULLEY ASSEMBLY (Short, ~ 2.5 inches) - Use for cleaners with White Drive Motors | EACH | $26.50 |
|
58 |
A3605 |
PULLEY ASSEMBLY (Medium, ~ 2.75 inches) - Use for cleaners with Black Drive Motors | EACH | $32.00 |
|
NA |
3607 |
WASHER (Use on All Pulley Assemblies, Use on Movable Axle of Jet / Rover cleaners, Rounded edges fac | EACH | $5.50 |
|
NA |
SP3502 |
TENSION DEVICE (OLD, replaced by Stepped Sleeve Rollers) - Formerly used to add Tension to Drive Bel | EACH | $35.00 |
|
60 |
A6010U |
PUMP MOTOR (Aquabot Plus RC, AB Ultra, Aquamax Jr Plus, Aquamax, AMAX Biturbo, Ultramax Jr, UMAX) | EACH | $279.99 |
|
61 |
4400 |
PROPELLER - All cleaners | EACH | $11.56 |
|
65 |
A2207 |
DC PUMP FILTER (White, Plastic) - Aquabot Turbo Solo / Turbo RC, All Aquamax RC / Solo cleaners | ASSEMBLY | $50.00 |
|
66 |
300099 |
TUBING (Clear PVC, 5/16"ID x 7/16"OD) - Use to divert water from the DC Pump Filter to the DC Pump | PER FOOT | $1.04 |
|
68 |
S300092 |
DC PUMP MOTOR (Single, no Gate, 2-Wire) - Aquabot Turbo Solo, All Aquamax Solo / IR cleaners | EACH | $70.00 |
|
68 |
S300093 |
DC PUMP MOTOR (Dual, with Gate, 2-Wire) - Aquabot Turbo RC, Aquabot T4, All Aquamax RC cleaners | EACH | $70.00 |
|
69 |
300111 |
TUBING (Clear PVC, 3/16"ID x 5/16"OD) - Use to divert water from the DC Pump to the Piston Assembly | PER FOOT | $1.05 |
|
70 |
300109 |
CLAMP (Grey, Plastic, Narrow) - Aquabot Turbo Solo / RC / T4, All Aquamax RC / Solo cleaners | EACH | $2.20 |
|
70 |
300108 |
CLAMP BRACKET (Grey, Plastic, Wide) - Aquabot Turbo Solo / RC, All Aquamax RC / Solo cleaners | EACH | $2.20 |
|
71 |
300107 |
BACK PLATE BLOCK (Grey, 4 holes) - Use to support the DC Pump Motor inside of the Body Assembly | EACH | $2.20 |
|
72 |
6204 |
SPACER (Plastic, cylinder) - Use to make space between the Back Plate Block and the Body Assembly | SET OF 4 | $0.80 |
|
73 |
1107 |
SCREW (10-32, 1-3/4" Phil Pan Head) - Use to fasten Clamp & Piston onto Sideplate of a Model G cleaner | EACH | $1.20 |
|
73 |
2301 |
SCREW (10-32, 1/2" Phil Pan Head) - Use with Clamp to fasten Piston to Sideplate and DC Pump to Block | EACH | $1.20 |
|
75 |
7109 |
WASHER (St.Steel) - Use with # 2500 screw against Body Assembly to fasten Back Plate Block to Body | EACH | $0.60 |
|
77 |
S300090 |
PISTON ASSEMBLY (White, Plastic) - One Piston is used for Solo cleaners, Two are used for RC cleaners | EACH | $65.00 |
|
78 |
300084 |
RUBBER TIP (White, Rubber) - Use at the bottom of the plunger of the Piston Assembly | EACH | $2.20 |
|
80 |
A8511IR |
DRIVE MOTOR (Black, bare wire leads) - Aquamax IR, Aquamax Biturbo IR | EACH | $419.99 |
|
80 |
A8517MBT |
DRIVE MOTOR (Black, bare wire leads) - Aquamax, Aquamax RC, Aquamax Biturbo RC | EACH | $419.99 |
|
80 |
A8516MBTS |
DRIVE MOTOR (Black, bare wire leads) - Aquamax Solo, Aquamax Biturbo Solo | EACH | $419.99 |
|
80 |
A8520 |
DRIVE MOTOR (Black, BB Air Sensor, bare wire leads) - All Aquamax units with Air Sensor | EACH | $419.99 |
|
83 |
4613 |
SPIRAL PIN (3/4", solid Stainless Steel) - Used in the end of the Drive Motor shaft, use Lock-Tite | EACH | $1.20 |
|
86 |
SP5474 |
SHRINKABLE BUTT CONNECTORS (Light Blue, crimp closed and heat shrink to seal) | PAIR | $1.20 |
|
90 |
A38001MG |
WHEEL TUBE ASSY (NEW, Aquamax, Aquamax Biturbo) - Model 'G' | EACH | $70.00 |
|
91 |
11058 |
RETAINING RING (E-Clip, New Style) - Aquabot Turbo, AB Plus RC, Aquabot T4, AB Ultra, All AMAX / UMAX | EACH | $3.50 |
|
92 |
3603 |
WASHER (Nylon, Flat) - Use for All cleaners on the end of Wheel or Wheetube Assembly | EACH | $1.20 |
|
97 |
SPA2901 |
SPONGE BRUSHES (Black Sponge Foam, Long) - Aquamax, Aquamax Biturbo | PAIR | $75.00 |
|
97 |
SP3002BM |
RUBBER BRUSHES (Blue Molded Rubber, Long) - Aquamax, Aquamax Biturbo, PHV 200 | PAIR | $80.00 |
|
97 |
SP3008 |
PVA CLIMBING BRUSHES (Light Blue PVA Foam, Long) - Aquamax, Aquamax Biturbo | PAIR | $125.00 |
|
NA |
SP3007 |
PVA CLIMBING RINGS (Light Blue PVA, 1" thick) - Fit over Rubber Brushes to add more traction ** | SET OF 4 | $25.00 |
|
99 |
3201 |
DRIVE TRACK (Blue) | EACH | $21.00 |
|
99 |
3203 |
DRIVE TRACK with TRACTION TABS (Blue) - For all Model 'G' units | EACH | $21.00 |
|
100 |
SP2675 |
MODEL G SPACER BRACKETS ** necessary with 'Model G' Drive Tracks | SET OF 4 | $4.50 |
|
101 |
8101 |
FILTER BAG (Fine) - Aquabot Ultra, Aquamax / Biturbo, Ultramax Junior, JetMax, Power Handi-Vac 200 | EACH | $70.00 |
|
101 |
8201 |
FILTER BAG (Mesh) - Aquabot Ultra, Aquamax / Biturbo, Ultramax Junior, JetMax, Power Handi-Vac 200 | EACH | $68.00 |
|
102 |
SP8001 |
FILTER BAG CLIP (Black, Plastic) - Aquamax, Aquamax Biturbo | PAIR | $8.00 |
|
103 |
5301 |
FILTER SCREEN (White, Cage) - Aquabot Ultra, Aquamax / Biturbo, Ultramax Junior | EACH | $32.00 |
|
104 |
2702 |
SCREW (#6, 11/16", Phil Pan-Flat Head, Pointed) - For fastening the 5300 / 5301 Filter Screen to the Body | EACH | $1.20 |
|
105 |
A9201XC |
BOTTOM LID ASSY. (White, Square Wire Frame) - Aquabot Ultra, JetMax, Aquamax / Biturbo, PHV 200 | EACH | $110.00 |
|
107 |
9301 |
INTAKE VALVE FLAP (Black PVC Rubber) - Aquabot Ultra, Aquamax / Biturbo, JetMax, PHV 200 | EACH | $2.35 |
|
108 |
S3103 |
H-FLOAT (Foam, Plastic, with Screws) - Fasten to Bottom Lid if cleaner's wall-climbing is not high enough | ASSEMBLY | $10.98 |
|
NA |
SP5173 |
WEIGHTS (Black) - Put in Bottom Lid if cleaner's wall-climbing is too high, or to help JetMax / Jr sink to floor | PAIR | $6.50 |
|
109 |
SP3104 |
SIDE POCKET FLOATS (White, Foam Blocks) - Put in Bottom Lid if wall-climbing is not high enough | PAIR | $3.50 |
|
110 |
7063C |
POWER SUPPLY (3-Prong, Male Socket) - Aquamax Jr HT, Aquamax Jr Plus, Aquamax, PHV 100 | EACH | $229.99 |
|
110 |
A7082 |
POWER SUPPLY (4-Prong, Male Socket) - Aquamax Junior Plus RC, Aquamax RC | EACH | $351.50 |
|
110 |
A7065 |
POWER SUPPLY (4-Pin, Male Socket) - Aquamax Biturbo, Power Handi-Vac 200 / 300 | EACH | $265.00 |
|
110 |
A7064 |
POWER SUPPLY (7-Pin, Male Socket, Radio RC) - Aquamax Biturbo RC | EACH | $379.00 |
|
111 |
7108 |
SOCKET ASSY. (3-Pin, Male, 2-Wire) - Aquabot / Turbo / T2, All Jet and Rover cleaners, Aquamax / Jr | EACH | $10.00 |
|
111 |
7135 |
SOCKET ASSY. (4-Pin, Male, 4-Wire) - Aquabot Turbo Solo / Turbo RC, Aquamax Biturbo | EACH | $32.00 |
|
111 |
7136 |
SOCKET ASSY. (7-Pin, Male, 7-Wire) - Aquabot T4, All Aquamax RC cleaners, Old Aquabot Plus RC / Ultra | EACH | $32.00 |
|
NA |
7163E |
DUST CAP (OLD, Plastic, Threaded, Chained) - Aquamax Biturbo RC, AMAX Jr Plus RC | EACH | $1.20 |
|
112 |
7005 |
FUSE HOLDER (Standard, Push & Turn style) - Most Residential and Commercial cleaners | EACH | $7.98 |
|
112 |
7205 |
FUSE HOLDER (Alternate, Phillips Head style) - Only when specified by Aqua Products Service | EACH | $7.98 |
|
112 |
7206 |
FUSE HOLDER (MINI, Phillips Head style) - Use for All Power Supplies with Dial Timers | EACH | $7.98 |
|
NA |
7002 |
FUSE (5.0 Amp, 250 Volt, Slow-Blow) - Aquabot Plus RC, Aquabot Ultra, All AMAX, All UMAX, All PHV | EACH | $3.00 |
|
NA |
7211 |
FUSE (3 Amp, MINI, 250 Volt, Slow-Blow) - New Aquabot Plus RC and Aquabot Ultra, JetMax / JetMax Jr | EACH | $3.00 |
|
114 |
7106 |
ON / OFF LIGHTED SWITCH (Wide, Standard, Red, 3-Wire) - Use for Power Supply | EACH | $7.70 |
|
115 |
7024 |
ANTENNA (4", with Hardware) - Aquamax Jr Plus RC, Aquamax RC, Aquamax Biturbo RC | EACH | $11.50 |
|
116 |
220117C |
TRANSMITTER (Radio RC, Grey & Yellow/ Blue▲▲/ Red LED light) - Aquabot Turbo RC, Aquamax RC's FOR NEW Units only - Transmits to A220200FCC Receiver - Older units will need KIT | EACH | $65.00 |
|
117 |
7041A |
HANDLE (Plastic, with Hardware) - Use on All Power Supplies except Ultramax | ASSEMBLY | $5.88 |
|
118 |
7102 |
CORD FOR POWER SUPPLY (3-Wire, Green, Black, and White) - Use on All Power Supplies | EACH | $11.00 |
|
NA |
2209 |
INFRA RED SENSOR (Aquamax Jr Plus, Aquamax, Aquamax Biturbo) | EACH | $161.50 |
|
NA |
2009 |
IR BRACE ASSEMBLY (all hardware included) - Use to hold the IR Sensor in position on the cleaner | ASSEMBLY | $22.99 |
|
NA |
2008 |
SCREWS (Use to hold IR Brace inside of Outer Shell) - Screw from outside of Shell into IR Brace Assembl | EACH | $1.20 |
|
NA |
1609 |
TIE (Blue, #4, Plastic, reusable) - Use for coiling the Cable Assembly among other things | EACH | $1.20 |
|
88888 |
Polaris Unicover® PREVENT AUTOMATIC POOL CLEANER FROM GETTING STUCK ON YOUR MAIN DRAIN! |
EACH | $70.00 |