AQUABOT TURBO RC Parts List |
 |
| ITEM # | PART # |
DESCRIPTION
|
UNITS
|
RETAIL
|
BUY NOW
|
|
1
|
A10000B | HANDLE ASSY. (Blue & White, Bracket included) - Aquabot, AB+RC, AB Turbo, AMAX Jr | ASSEMBLY | $99.00 | |
|
2
|
S1100B | BRACKET FOR HANDLE (Blue) - all units except Merlin and Bravo | EACH | $29.99 | |
|
8
|
1105 | SCREW (10-32, 7/8", Phil Pan Head) - For securing the Handle Bracket to the Body Assembly | EACH | $1.20 | |
|
9
|
2701 | SCREW (#8, 11/16", Phil Pan Head) - To secure the Sideplate on the lower edge of the Body | EACH | $1.20 | |
|
10
|
2500 | SCREW (#8, 1-1/4" Pan Head) - For securing the DC Pump's Back Plate Block to the Body Assembly | EACH | $1.20 | |
|
10
|
2500 | SCREW (Pan head) - For securing all White Drive Motors, or Black Motors with Spacer Bracket | EACH | $1.20 | |
|
12
|
2100 | P-CLIP (1/4", Plastic) - For securing the non-foam-insulated part of a 2-wire cable to the Body | EACH | $1.20 | |
|
12
|
2101 | P-CLIP (5/16", Plastic) - For securing the non-foam-insulated part of a 4-wire cable to the Body | EACH | $1.20 | |
|
12
|
2102 | P-CLIP (7/16", Plastic) - For securing the foam-insulated part of a 2-wire cable to the Handle Assy. | EACH | $1.20 | |
|
12
|
2105 | P-CLIP (1/2", Plastic) - For securing the Heat Shrink part of the 2-wire cable to the Handle Assy. | EACH | $1.20 | |
|
12
|
2106 | P-CLIP (5/8", Plastic) - For securing the foam-insulated part of a 4-wire cable to the Handle Assy. | EACH | $1.20 | |
|
13
|
2700 | SCREW (#8, 11/16", Phil Pan-Flat Head) - To secure a P-Clip whenever the hole is deep | EACH | $1.20 | |
|
13
|
2700 | SCREW (#8, 11/16", Phil Pan-Flat Head) - To secure the upper part of the Sideplate on the Body | EACH | $1.20 | |
|
13
|
2700 | SCREW (#8, 11/16", Phil Pan-Flat Head) - For securing the DC Pump Clamps to the Back Plate Bloc | EACH | $1.20 | |
|
14
|
2260 | SCREW (#6, 7/16", Phil Pan-Flat Head) - To secure a P-Clip when the hole is shallow | EACH | $1.20 | |
|
14
|
2260 | SCREW (#6, 7/16", Phil Pan-Flat Head) - To secure the Top and Bottom of the Outlet closed | EACH | $1.20 | |
|
14
|
2260 | SCREW (#6, 7/16", Phil Pan-Flat Head) - To secure the H-Float to the Bottom Lid | EACH | $1.20 | |
|
16
|
S7930 | EZ-SWIVEL (Blue, Plastic, Small) - For detangling the 2-wire Cable Assembly | ASSEMBLY | $43.98 | |
|
16
|
S7935 | EZ-SWIVEL (Blue, Plastic, Large) - For detangling the 4 or 7-wire Cable Assembly | ASSEMBLY | $43.98 | |
|
25
|
2230B | OUTLET TOP (Top and Bottom) - For all units except those with an Outer Shell, Merlin, Bravo | 2 PIECES | $28.00 | |
|
29
|
2300 | ANTI-ROLL BRACKETS (Plastic) - Install raised-up, on top of Body Assembly to prevent rolling | SET OF 4 | $11.00 | |
|
30
|
3402 | LOCK-NUTS (Hex, Nylon insert) - For securing the Screws of the Anti-Roll Brackets | EACH | $6.00 | |
|
30
|
3402 | LOCK-NUTS (Hex, Nylon insert) - For securing the Screws of the Grey Clamp attached to the Side P | EACH | $6.00 | |
|
31
|
2261 | SCREW (M-5, Phil Bev Head) - To secure the Anti-Roll Brackets to the Body Assembly | EACH | $1.20 | |
|
36
|
9204BL | LOCK-TABS (Blue, Plastic) - For All Body Assemblies, used to hold Bottom Lid to base of unit | SET OF 2 | $3.50 | |
|
38
|
2303 | SCREWS (18-8, 8/32" x 1/2", Phil Bev Head) - To secure the Lock-Tabs to the Body Assembly | EACH | $1.20 | |
|
39
|
7133 | LOCK-NUT (Nylon Insert, Hex) - To secure the Screws of the Lock-Tabs to the Body Assembly | EACH | $0.80 | |
|
51
|
2600 | BUSHING (White, Plastic) - For use on all Side plates to lock-in Wheel Tube Assemblies | EACH | $2.65 | |
|
52
|
2610 | BUSHING (White, Plastic) - For use on some Side plates to lock-in the Body's Pin Support | EACH | $4.50 | |
|
54
|
3500 | SMALL ROLLER (White, Plastic) - Supports the Drive Track, install on lower legs of Side Plate | EACH | $2.65 | |
|
55
|
3700 | LARGE ROLLER (White, Plastic) - Supports the Drive Track, installs on Body's Pin Support | EACH | $3.50 | |
|
56
|
3506 | STEPPED SLEEVE ROLLER (White) - Supports Drive Belt, installs on the upper Side Plate leg | EACH | $2.65 | |
|
57
|
3302 | DRIVE BELTS (Tan) | PAIR | $16.50 | |
|
58
|
A3600 | PULLEY ASSEMBLY (Short) - For most Residential units with White Drive Motors | EACH | $26.50 | |
|
Not Pictured
|
3607 | WASHER - For Pulley Assembly - install with rounded edges facing Drive Belts | EACH | $5.50 | |
|
60
|
A6001T | PUMP MOTOR (Aquabot Turbo, Tempo, Aquamax Jr HT) | ASSEMBLED | $209.99 | |
|
61
|
4400 | PROPELLER (Black) - For Pump Motor, tap onto half-circle shaped motor shaft. | EACH | $11.56 | |
|
69
|
300111 | TUBING (Clear PVC, 3/16"ID x 5/16"OD) - Use to divert water from the DC Pump to the Piston Assembly | Per Ft. | $1.05 | |
|
70
|
300109 | CLAMP (Grey, Plastic, Narrow) - Aquabot Turbo Solo / RC / T4, All Aquamax RC / Solo cleaners | EACH | $2.20 | |
|
77
|
S300090 | PISTON ASSEMBLY (White, Plastic) - One Piston is used for Solo cleaners, Two are used for RC cleaners | EACH | $65.00 | |
|
78
|
300084 | RUBBER TIP (White, Rubber) - Use at the bottom of the plunger of the Piston Assembly | EACH | $2.20 | |
|
Not Pictured
|
2251 | SCREW (8-18, 3/4", Phil No-head) - For securing Pump Motors to the Body Outlet Top | EACH | $1.20 | |
|
80
|
A4510T | DRIVE MOTOR (White, Terminal Basin) - Aquabot Turbo, Tempo, Aquamax Junior HT | ASSEMBLED | $299.99 | |
|
83
|
4613 | SPIRAL PIN (3/4", solid Stainless Steel) - For the shaft end of every Drive Motor, use Lock-Tite | EACH | $1.20 | |
|
82
|
4618 | BRASS NUTS (Hex, small) - For attaching the Loop Connectors of wires to Brass Terminals | EACH | $1.20 | |
|
Not Pictured
|
4619 | LOOP CONNECTOR (Aluminum, crimp) - For attaching Motor wires to Brass Terminals | PAIR | $1.20 | |
|
84
|
5000 | TERMINAL COVER (Plastic, Rectangle) - For sealing up the Basin in all White Drive Motors | EACH | $2.10 | |
|
85
|
4501 | SCREW (5/8") - For sealing the Terminal Cover onto the Basin of all White Drive Motors | EACH | $1.20 | |
|
Not Pictured
|
800001 | PUTTY (Grey, Waterproof) - For waterproofing the Terminal Basin in all White Drive Motors | 1 Lb | $9.50 | |
|
90
|
A38205MG | WHEEL TUBE ASSY (Aquabot, Aquabot Turbo, Aquamax Jr HT, AMAX Jr +) - Model 'G' | ASSEMBLY | $65.50 | |
|
91
|
11058 | RETAINING RING (E-Clip) - New Style | EACH | $3.50 | |
|
92
|
3603 | WASHER (Nylon, Flat) - For each end of the Wheel Tube | EACH | $1.20 | |
|
97
|
A2900 | BRUSHES (Black Sponge Foam) - Aquabot, Aquabot Turbo, Aquamax Jr, Merlin, Bravo | PAIR | $65.00 | |
|
97
|
3002B | BRUSHES (Blue Molded Rubber) - ABOT, AB Turbo, AMAX Jr, Merlin, Bravo, Ultramax ** | PAIR | $75.00 | |
|
99
|
3201 | DRIVE TRACK (Blue) | EACH | $21.00 | |
|
99
|
3203 | DRIVE TRACK with TRACTION TABS (Blue) - For all Model 'G' units | EACH | $21.00 | |
|
100
|
2675 | MODEL G SPACER BRACKETS ** necessary with 'Model G' Drive Tracks | SET OF 4 | $4.50 | |
|
101
|
8200 | FILTER BAG (Mesh) - AB, ABTurbo, AB+RC, AMAX Jr, Merlin, Bravo, PHV50/300, Jet's, UMAX ** | EACH | $46.00 | |
|
101
|
8100 | FILTER BAG (Fine) - AB, ABTurbo, AB+RC, AMAX Jr, Merlin, Bravo, PHV 50/300, Jet's, UMAX ** | EACH | $47.00 | |
|
103
|
5300 | FILTER SCREEN (White, Cage) - AB, AB Turbo, AB+RC, AMAX Jr, PHV 50/300 UMAX ** | EACH | $26.50 | |
|
104
|
2702 | SCREW (#6, 11/16", Phil Pan-Flat Head, Pointed) - For securing the Filter Screen to the Body | EACH | $1.20 | |
|
105
|
A9200X | BOTTOM LID ASSY. (White, W-shaped Wire Frame) - Aquabot | ASSEMBLED | $89.00 | |
|
106
|
9305B-B | INTAKE VALVE FLAP (Blue Plastic) - Aquabot, AB Turbo, AMAX Jr, UMAX, PHV 50/300 | EACH | $4.34 | |
|
108
|
S3103 | H-FLOAT (Foam, Plastic, with Screws) - All wall-climbing units may need this to climb | ASSEMBLY | $10.98 | |
|
109
|
3104 | SIDE POCKET FLOATS (White, Foam Rectangle Blocks)- Wall-climbing units may use them | PAIR | $3.50 | |
|
Not Pictured
|
5173 | WEIGHTS (Black, Coated, with Inserts and Screws) - Wall-climbing units may need them | PAIR | $6.50 | |
|
110
|
A7091 | POWER SUPPLY (4-Pin Male, 7hr External Dial Timer, Radio RC) - AB Turbo Solo / RC | ASSEMBLED | $351.50 | |
|
111
|
7135 | SOCKET ASSY. (4-Pin, Male, 4-Wire) - AB Turbo Solo, AB Turbo RC, Aquamax Biturbo) | ASSEMBLY | $32.00 | |
|
112
|
7005 | FUSE HOLDER (Standard, Push & Turn style) - All units Residential and Commercial | ASSEMBLY | $7.98 | |
|
Not Pictured
|
7101 | FUSE (2.5 Amp, 250 Volt, Slow-Blow) - ABOT, AB Turbo, ABT RC/Solo, Merlin, Bravo | EACH | $2.85 | |
|
113
|
7111 | RESET SWITCH (Standard, Black button, 2-Wire) - ABOT Turbo, AB Turbo Solo/RC | EACH | $11.00 | |
|
114
|
7106 | LIGHTED SWITCH (Standard, Red, 3-Wire) - For every Power Supply | EACH | $7.70 | |
|
117
|
7041 | HANDLE (Plastic, with Screws, Nuts, and Star Washers) - All ABOT, all AMAX, all PHV | ASSEMBLY | $5.88 | |
|
117
|
7041A | HANDLE (Rubber, with Holders, Screws, and Nuts) - Ultramax, UMAX Jr ..and most others | ASSEMBLY | $5.88 | |
|
118
|
7102 | CORD FOR POWER SUPPLY (3-Wire, Green, Black, and White) - For all Power Supplies | EACH | $11.00 | |
|
119
|
7074 | TIMER 7 HOUR (External, Dial, 120 Volt) - AB Turbo, AB Turbo Solo, AB Turbo RC | EACH | $50.00 | |
|
26
|
A22000-W2H | BODY ASSY. (White, w/ Holes, Lock Tabs, Pin, Outlet Bottom, Inserts) - AB Turbo RC/Solo | ASSEMBLED | $120.00 | |
|
26
|
A22000 | BODY ASSY. (White, with all Holes, Lock Tabs, Pin, Outlet Bottom, Inserts) - Aquabot | ASSEMBLED | $120.00 | |
|
91
|
A2207 | AIR FILTER ASSEMBLY (White, Plastic) - Used on any unit with a DC Pump | ASSEMBLY | $50.00 | |
|
71
|
300096 | TUBING (Clear PVC, thick diameter) - To supply the DC Pump with air from the Air Filter | PER FOOT | $1.20 | |
|
109
|
S300092 | DC PUMP MOTOR (Single, no Gate, 2-Wire) - Used in units with a one-way Solo RC | EACH | $70.00 | |
|
110
|
S300093 | DC PUMP MOTOR (Dual, with Gate, 2-Wire) - Used in units with a two-way RC | EACH | $70.00 | |
|
75
|
300109 | CLAMP (Grey, Plastic) - To hold the DC Pump to the Back-Plate and the Piston to the Side Plate | EACH | $1.95 | |
|
72
|
300107 | BACK PLATE BLOCK (Grey, 4 holes) - To support the DC Pump inside of the unit | EACH | $1.95 | |
|
Not Pictured
|
6204 | SPACER (Plastic, cylinder) - Use between the DC Pump Back Plate and the Body Assembly | EACH | $0.70 | |
|
Not Pictured
|
7109 | WASHER (St.Steel) - For use with the Pan Head Screw against Body Assembly and Grey Piston Cla | EACH | $1.20 | |
|
74
|
2301 | SCREW (10-32, 1/2" Phil Pan Head) - For securing the Grey Clamp and Piston on the Side Plate | EACH | $1.20 | |
|
Not Pictured
|
3007 | CLIMBING RINGS (Light Blue PVA, 1" thick) - Use on any unit, fitted over Rubber Brushes ** | SET OF 4 | $25.00 | |
|
112
|
7205 | FUSE HOLDER (Alternate, Phillips Head style) - All units, only when specified by AP Service | ASSEMBLY | $8.00 | |
|
Not Pictured
|
A220200 | RECEIVER (NEW, Radio, 2-Way) - Aquabot Turbo Solo, Aquabot Turbo RC, AMAX Bit RC | EACH | $199.95 | |
|
116
|
220105C | TRANSMITTER (Radio, 2way, Yellow w/ 2▲) - ABT RC's, AMAX RC's **A220200 Receiver | ASSEMBLED | $65.00 | |
|
119
|
7130 | TIMER 7 HOUR (Internal, Fixed, 120 Volt) - AB Turbo, AB Turbo Solo, AB Turbo RC | EACH | $50.00 | |
| 88888 | Polaris Unicover® PREVENT AUTOMATIC POOL CLEANER FROM GETTING STUCK ON YOUR MAIN DRAIN! |
EACH | $70.00 |